Firestone SA Flashing

1m x 450mm

Description

Firestone SA Flashing is a 457mm wide Rubbercover membrane fully laminated to Firestone Quickseam tape. It has a polyester release liner for easy removal and excellent weather resistance.SA Flashing can be used to line gutters, carry out general roof repairs where cured EPDM is required, sklights, parapets, flash in drain insert pieces and pipe flanges. SA Flashing is a labour saving and environmentally friendly alternative to conventional methods which use contact adhesive for attachment. SA Flashing can be used for curbs or parapets where flashing heights allow. Due to the fact that the Quickseam Tape Technology is used as the adhesive it is considered self-seaming. Simply prime the membrane with Firestone Quickprime Plus to which the SA Flashing will be installed.

Method Of Application

Using a Firestone Quickscrubber Pad and Handle, apply Quickprime Plus to the roof membrane and substrate to receive the SA Flashing, Allow Quickprime Plus to flash off (user will determine flash off time) Cut the SA Flashing to sufficient length for curb/parapet then apply once Quickprime Plus has flashed off.

Physical Characteristics

Superior ozone and ultraviolet resistance

Remains flexible over wide temperature variations

Excellent long term weathering qualities

Application temperature range between -23 degrees and +49 degrees.

Quickprime Plus must be used with SA Flashing!