'Advanced building products delivered directly to your door'

Home Page | Installation Guides | Order Tracking | View Cart | Checkout

Firestone EPDM Membranes
Flat Roof Kits
Edge Trims
Adhesives
Detailing Tapes & Outlets
Breather Membranes
Fixings
Accessories & Tools
Mechanically Fixed System
Special Offers
Fibretex 500
TNT Delivery
Green Roof System
Hedgehog

Installation Guides
About Us
Contact Us
Help


Aluminium Retaining Bar 1m

Aluminium Retaining Bar 1m
£9.25


7.5m x 3.5m Flat Roof Kit
£380.00


6.5m x 3.5m Flat Roof Kit
£330.00


5.5m x 3.5m Flat Roof Kit
£280.00


4.5m x 3.5m Flat Roof Kit
£230.00


Firestone Bonding Adhesive

Firestone Bonding Adhesive


Firestone EPDM Membrane (045 grade 1.14mm)


Permaroof External Corner
£2.00


Permaroof Bond & Seal
£3.50


Polypins


PictureGallery PictureGallery


Email to Friend
Quickprime plus


Add to Cart
 Quickprime Plus Size
  
  Quantity    

There are no reviews
Click to write one
 
Product Information
Firestone Quickprime Plus
 
 
 Description
 
Firestone Quickprime Plus is designed to clean and prime the EPDM membrane prior to application of Quickseam products. Quickprime Plus must be applied with a Quickscrubber Pad and Handle.
 
Preparation
 
Surfaces to be primed must be clean, dry and free of foreign materials, talc and dirt. Pre-cleaning with Splice Wash may be required. Stir Quickprime Plus thoroughly before and during use. When exposed to lower temperatures for a prolonged period of time, restore to room temperature prior to use. Pour the required amount of Quickprime Plus into a bucket for ease of application.
 
Application
 
Apply Quickprime Plus to the EPDM membrane with a Quickscrubber Pad and Handle, using long back and forth strokes with moderate to heavy pressure along the length of the area. Continue until surfaces become dark grey in colour (no streaking or puddling). Factory seams require parallel as well as perpendicular application motions along the factory seam. Allow the primed surfaces to dry completely according to the touch-push test (usually less than 10 minutes) before applying Quickseam products (3" seam tape, 6" batten cover strip, 9" formflash etc)
 
Coverage
 
Thinning is not allowed. The following coverage rates can be achieved Per Litre of Quickprime Plus,
 
Standard seam with 3" seam tape = 15lm - 2 sides
6" batten cover strip = 8lm - 1 side
5" Flashing Tape = 10lm - 1 side
9" Formflash = 4lm - 1 side
RPF Strip = 15lm - 1 side
RMA Strip = 15lm - 1 side
 
Precautions
 
Flammable, keep away from sources of ignition. Do not smoke when using. For professional use only. Use only in well ventilated areas. Avoid contact with skin and eyes. Keep out of reach of children.

Storage

Store in original containers at temperatures between 15 - 25 degrees. Keep the material out of direct sunlight until ready for application.

Shelf life - 12 months, when stored in above mentioned conditions, shelf life will be reduced if exposed to higher temperatures.

Related Products
Universal flashing kit
Universal flashing kit
£35.99
Qty    
Quickseam SA Flashing (1m x 457mm)
Quickseam SA Flashing (1m x 457mm)
£16.00
Qty    
9 Formflash Per Linear Metre
9" Formflash Per Linear Metre
£11.99
Qty    
6 Batten Cover Strip Per Linear Metre
6" Batten Cover Strip Per Linear Metre
£7.98
Qty    
5 Flashing Tape Per Linear Metre
5" Flashing Tape Per Linear Metre
£6.05
Qty    
Similar Products
Firestone Bonding Adhesive
Firestone Bonding Adhesive
Qty    
9 Formflash 15.25m Roll
9" Formflash 15.25m Roll
£176.00
Qty    
EPDM Drain Outlet
EPDM Drain Outlet
£13.35
Qty    
Batten Bar 3m Length
Batten Bar 3m Length
£4.50
Qty    

Your cart is empty

Change Currency

Click Here

  Advanced Search

Your E-mail Address