Firestone Water Based Adhesive

WBA-3781

 Description

Firestone Water Based Adhesive WBA-3781 is designed for bonding Firestone EPDM to Timber surfaces.

Preparation

Bonding surfaces must be clean, dry, smooth, free sharp edges, loose and foreign materials, oil, grease and any other contaminents.

Application

Stir adhesive thoroughly before and during use. Use only when temperatures will not fall below freezing at anytime 24 hours after mating of EPDM.

Apply WBA-3781 over plywood or OSB substrates with a solvent resistant roller, taking care to completely cover the substrate evenly to avoid globs and puddles of adhesive. The EPDM may be Wet-mated to the coated plywood or OSB by rolling the membrane in place over the substrate. To ensure proper adhesion, compress the bonded portion of the sheet to the substrate with a stiff broom or heavy roller, such as a linoleum roller.

Coverage

Coverage Rate - Wet Applied to Timber Deck

2.5L Tub - approx 8 - 10m2

5L Tub - approx 18 - 20m2

10L Tub - approx 38 - 40m2

Storage

 Store in original containers at temperatures between 15 - 25 degrees. Keep From Freezing

Shelf life - 18 months, when stored in above-mentioned conditions

Precautions

May cause mild transient eye irritation. Avoid contact with eyes, skin and clothing. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If swallowed, get medical attention. Keep container closed when not in use. Keep out of reach of children.

Firestone Water Based Adhesive Must Be Used Onto Timber